IFM AL1332 Operating Instructions Manual Download

Page: 65 / 117

IO-Link Master with EtherCAT Interface DataLine 8 Ports IP 65 / IP 66 / IP 67

9.3.3

Configure IO-Link master

33867

The IO-Link master is configured via the CoE interface (

→ TwinCAT-online help). The configuration is

made via the following parameters:

Name

Description

Reference

Current Use Case

Access rights to the IO-Link master

→

Manufacturer Specific Index (0x2000)

(

→ S.

)

Reset To Factory

Reset IO-Link master to factory settings

→

Manufacturer Specific Index (0x2000)

(

→ S.

)

9.3.4

Configure IO-Link ports

33886

The IO-Link ports are configured via the CoE interface (

→ TwinCAT-online help). The user can

configure each IO-Link port separately. The configuration is made via the following parameters:

Name

Description

Reference

IO Settings

Configuration of the IO-Link ports X01...X08

→

Port Configuration (0x8000)

(

→ S.

)

Vendor Specific IO Settings

Manufacturer-specific settings of the IO-Link
ports X01...X08

→

Port Configuration (0x8000)

(

→ S.

)

The AL1332 has no failsafe function for the outputs of the IO-Link ports. If the fieldbus
connection is interrupted, the last used output values are written and marked as invalid.

Summary of Contents for AL1332






















































































































Search results

Summary of Contents for AL1332

Reviews:

Related manuals for AL1332

Brands by name

Popular brands

IFM AL1332, Operating Instructions Manual

Search results

Summary of Contents for AL1332

Reviews:

Related manuals for AL1332

Brands by name

Popular brands