IO-Link master with EtherCAT interface DataLine 4 ports IP 65 / IP 66 / IP 67
20
>
7.2
LED indicators
34047
The device only has the following LED indicators:
>
7.2.1
Status LEDs
34198
The RDY LED indicates the status of the gateway.
The RUN LED indicates the current state of the EtherCAT state machine.
The ERR LED inidcates occuring errors.
Status LED
Description
RDY
green
on
Status: OK
flashes 5 Hz
Status: Error
flashes (200 ms on,
800 ms off)
Status: Firmware update is running
off
Status: Gateway not running or gateway booting
RUN
green
on
Device in OPERATIONAL state
flashes 2.5 Hz
Device in PRE-OPERATIONAL state
flahes (200 ms on,
1000 ms off)
Device in SAFE-OPERATIONAL state
flashes 10 Hz
Device is booting and not yet in INIT state or device is in BOOTSRAP state
off
Device in INIT state
ERR
red
on
Error in application controler
flashes 10 Hz
Boot error
flashes (200 ms on,
200 ms off, 200 ms on,
1000 ms off)
Watchdog error (EtherCAT or process data)
flashes (200 ms on,
1000 ms off)
Local error
flashes 2.5 Hz
Invalid configuration
off
No error
>
7.2.2
EtherCAT interface
33682
Each EtherCAT interface (X21, X22) has 1 L/A LED. The LED indicates the status of the Ethernet
connection.
Status LED
Description
L/A
green
on
Ethernet connection established
flashes
Data is transmitted via the Ethernet interface.
off
No Ethernet connection