IFM AL1302 Operating Instructions Manual Download

Page: 23 / 105

IO-Link Master with PROFINET Interface DataLine 8 Ports IP 65 / IP 66 / IP 67

Set-up

Content

Read device and diagnostic information ................................................................................................24

52357

When the supply voltage is switched on, the AL1302 starts with the factory settings. The display
elements signal the current operating mode (

→

Operating and display elements

(

→ S.

)).

To enable parameter setting of the AL1302, the IoT interface and / or the fieldbus interface must be
configured according to the network environment.
► Configure IoT interface (LR DEVICE: →

IoT: Configure IP settings

(

→ S.

) or

→

Configure

IoT interface

(

→ S.

)).

► Configure fieldbus interface (LR DEVICE: →

Fieldbus: Configure IP settings

(

→ S.

) or IoT:

→

Configure the fieldbus interface

(

→ S.

)).

IoT / fieldbus interface has valid IP settings.

User can set the parameters of the AL1302.

Further steps:



Optional: Update firmware of AL1302 (

→

Update firmware

(

→ S.

)).



Set the parameters of the AL1302 (

→

Configuration

(

→ S.

)).

Summary of Contents for AL1302










































































































Search results

Summary of Contents for AL1302

Reviews:

Related manuals for AL1302

Brands by name

Popular brands

IFM AL1302, Operating Instructions Manual

Search results

Summary of Contents for AL1302

Reviews:

Related manuals for AL1302

Brands by name

Popular brands