edgeController
41
>
The device loads the selected image file.
>
The menu page shows the new start image.
>
Setting the display brightness
61328
Requirements:
•
The menu page [System Setup] is active.
► [Display Brightness]
>
The menu page shows the current relative brightness of the screen (in %).
► Set the slider with the required value.
► Click on
to verify the set value.
► Click on
to save the set value.
>
The screen works with the selected screen brightness.
>
Setting the display orientation
61329
Requirements:
•
The menu page [System Setup] is active.
► [Display Orientation]
>
The menu page shows the available options for the visualisation of the display content.
► Click on the required option.
>
Set-up informs about required reboot.
► Click on [Yes] to enable the selected option.
>
The unit reboots.
>
The selected display orientation is effective.
OR
► Click on [No] to undo the selected option.
>
The menu page shows the available options for the visualisation of the display content.
>
Configuring the touch screen
61330
Requirements:
•
The menu page [System Setup] is active.
► [Touch Configuration]
>
The menu page shows the following setting options.
Name
Description
[Water optimized (default)]
Optimised for operation in wet conditions
[Glove optimized]
Optimised for use with gloves
► Select the required options.
► Click on
to save the changes.
>
The selected options are enabled.
