![background image](http://html1.mh-extra.com/html/ifm/ac412s/ac412s_device-manual_3900860092.webp)
SmartPLC SafeLine with PROFIBUS slave interface
92
Control Standard-SPS applications
41577
To control all Standard-SPS applications stored on the device:
1 Select the menu page
►
>
>
►
Select [All applications] tab.
2 Display status information about the Standard-SPS applications
>
Page shows the following information:
Designation
Meaning
[Total]
Number of applications stored on the device
[Started]
Number of applications running
►
Perform one of the following actions:
– Launch all Standard-SPS applications: continue with → step 3
– Stop all Standard-SPS applications: continue with → step 4
– Reset all Standard-SPS applications: continue with → step 5
3 Launch all Standard-SPS applications
►
Press [Starten] button.
>
The confirmation prompt appears.
►
Press [OK] to confirm the prompt.
>
All Standard-SPS applications are started.
►
Continue with → step 6
4 Stop all Standard-SPS applications
►
Press [Stop] button.
>
The confirmation prompt appears
►
Press [OK] to confirm the prompt.
>
All Standard-SPS applications are stopped.
►
Continue with → step 6
5 Reset all Standard-SPS applications
►
Press [Reset] button.
>
The confirmation prompt appears.
►
Press [OK] to confirm the prompt.
>
All Standard-SPS applications are reset and stopped.
6 Display the status of the Standard-SPS applications
>
The page shows updated information about the stored Standard-SPS applications.
>
The status of the [Start], [Stop] and [Reset] buttons is updated.