IFM AC412S, Device Manual, Page: 106 / 242

SmartPLC SafeLine with PROFIBUS slave interface
106
Set compatibility mode
41426
To ensure downward compatibility with devices of the ControllerE product family, AC412S can be
operated in different compatibility modes. The set compatibility mode decides which PROFIBUS
modules, device-specific parameters and diagnostic data are used by AC412S.
To set the compatibility mode.
1 Deactivate PROFIBUS connection
► Disable the PROFIBUS connection of the device.
2 Select menu page
► >
► Select the [Compatibility] tab.
3 Select compatibility mode
►
Select one of the following values from the list:
Value
Description References
[AC14]
Native mode for Smart PLC models
AC1411 and AC1412 Parameter data:
→
Parameter data: compatibility mode AC14
(
→ S.
174 )
PROFIBUS modules:
→
PROFIBUS modules: compatibility mode AC14
(
→ S.
178 )
Alarms/diagnostics:
→
DP/V1 alarms
(
→ S.
215 )
[AC1305/06/26]
Compatibility mode for controller e
models C1305, AC1306 and AC1326 Parameter data:
→
Parameter data: compatibility mode AC1305/06/26
(
→ S.
176 )
PROFIBUS modules:
→
PROFIBUS modules: compatibility mode AC1305/06/26
(
→ S.
195 )
Alarms/diagnostics:
→
DP/V0 diagnosis
(
→ S.
212 )
► Use [Accect selection] to apply the selected value.
> The parameter data and PROFIBUS modules of the selected module are active.
4 Activate PROFIBUS connection
► Enable the PROFIBUS connection of the device.
> The device transmits the data written in the selected compatibility mode.