23
ifm
Programming Manual AS-i Gateway AC14 (4.2.x)
12/2017
System configuration
Configure Ethernet interface
>
6.2.2
Add fieldbus stack
18659
► Familiarise yourself with the following CODESYS functions!
Modbus configurator
→ Online help > Fieldbus support > Modbus configurator
To declare the Ethernet interface as a fieldbus interface:
1 Create/load CODESYS project
►
Create or load CODESYS project with the AS-i Gateway AC14.
2 Add fieldbus stack
►
In the device tree: Right-click on [X3 (Ethernet)].
►
In the context menu: Select [Add Device...].
>
Window [Add device] appears.
►
Set the following values:
1. [Vendor]: Select [<All vendors>].
2. In table: Select the requested fieldbus stack in the [Name] column.
3. [Name]: Enter name of the fieldbus stack.
►
Click on [Add Device]to add the requested fieldbus stack to the project.
>
In the device tree: CODESYS adds the selected fieldbus stack as sub-element of the Ethernet interface.
3 Configure the fieldbus stack
►
Configure added fieldbus device.
►
Save the project to apply changes.
