![background image](http://html2.mh-extra.com/html/ifm/ac1401/ac1401_device-manual_3883231073.webp)
AS-i Gateway with Profinet device interface
73
>
Synchronise the system time with an NTP server
41424
To synchronise the system time with an NTP server:
To synchronise the system time and date via Network Time Protocol (NTP), connect the
configuration interface of the device to an NTP server directly or over a network.
1 Select the menu page
►
>
►
Select [Clock] tab.
2 Deactivate the NTP client
►
Uncheck [Activate NTP] (→
Set the system time
(→ S.
>
The IP address field and the [NTP-Offset] list can be edited.
3 Set the IP address of the NTP server and NTP offset
►
Set the following parameters as required:
Parameter
Description
Possible values
IP address field
IP address of the NTP server
e.g.
192.168.0.100
[NTP-Offset]
(optional)
Time zone of the NTP server in
UTC (Universal Coordinated
Time).
[no offset]
System time is taken from NTP server
without offset
[UTC -12:00
...
UTC +12:00]
Adopt time zones according to UTC
division (displayed number of hours will
be added/subtracted)
►
Press [Accept selection] button.
►
The device tries to synchronise the system time with the NTP server.
>
NTP status:
[NTP waiting
]
In case of a successful synchronisation:
>
NTP status:
[NTP successful
]
>
[Time] and [Date] show the synchronised values.
In case of a failed synchronisation:
►
Check the settings of the IP parameters of the configuration interface.
►
Check the IP address of the NTP server.
►
Repeat the process.