![background image](http://html2.mh-extra.com/html/ifm/ac1401/ac1401_device-manual_3883231119.webp)
AS-i Gateway with Profinet device interface
119
>
Switch operating modes
41702
The operator / programmer can switch the operating modes of the AS-i master as follows:
per GUI / web interface (
→
Set the operating mode of the AS-i master
(
per function block
Set_Mode
(
→ programming manual:
Set_Mode
)
If an AS-i slave with the address 0 is connected, then the AS-i master cannot switch from
"projection mode" into "protected mode" !
► Address the AS-i slave correctly.
► Switch the operating mode.