ifm
System Manual
ecomat
mobile
SmartController (CR2500) V05
Configurations
Set up programming system
23
Supplement project with further functions
You have created a project using an
ifm
template and you have defined the CAN network. Now you
want to add further functions to this project.
For the example we take a CabinetController CR2500 as CAN open Master to which an I/O
CabinetModule CR2011 and an I/O compact module are connected as slaves:
PLC configuration:
A joystick is connected to the CR2012 which is to trigger a PWM output on the CR2032. How is that
achieved in a fast and simple way?
►
Save CoDeSys project!
►
In CoDeSys use [Project] > [Copy...] to open the project containing the requested function:
e.g.
CR2500Demo_CR2012_02.pro
from directory
DEMO_PLC_CDV
…
under
C:\...\CoDeSys
V
…
\Projects\
:
►
Confirm the selection with [Open].
> Window [Copy objects] appears:
