IFM Electronic AL1121, Operating Instructions Manual

Page: 80 / 109

80
ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 4 Ports IP 69K (AL1121) 2017-05-31
Appendix
>
Command 0x10 – set mode
23461
The command changes the operating mode of an IO-Link port of the AL1121.
Corresponding parameter: [Port Mode] (
→ Port configuration
(
→ p.
69 ))
>
Command request
22990
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
4 Port no. (LSB)
5 Port no. (MSB)
6 reserved
7 reserved
8 reserved
9 reserved
10 Trigger 0x10
11 Target mode
12...45 reserved
Legend:
Port no. (LSB) Number of the IO-Link port (low
byte)
Port no. = 0xXX YY

Port no. (LSB) = 0x YY
8 bits 0x01 = port X01
0x02 = port X02
...
0x04 = port X04
Port no. (MSB) Number of the IO-Link port (high
byte)
Port no. = 0x XX YY

Port no. (MSB) = 0x XX
8 bits 0x00
Trigger Control of the command
execution 1 bit 0x0 = do not process command
0x1 = execute command
Target mode Operating type of the IO-Link port 8 bits 0x00 = deactivated
0x01 = operation as digital input (DI)
0x02 = operation as digital output (DO)
0x03 = operation as IO-Link intervals