IFM Electronic AL1121 Operating Instructions Manual Download

Page: 55 / 109

ifm

Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 4 Ports IP 69K (AL1121)

2017-05-31

Operation

9.2

Reboot the device

12760

When restarting the device, all settings are kept.

To restart the AL1121:
►

Start LR DEVICE.

►

Scan the network for devices.

LR DEVICE recognises the AL1121.

►

Under [ONLINE]: Click on [AL1121]

►

Select the [Setup] section.

LR DEVICE shows available parameters.

►

Click on [Restart] to restart the device.

LR DEVICE restarts the AL1121.

9.3

Error detection and elimination

20926

In order to recognise and eliminate errors, the user can use the following resource:



Status LED of the unit (

→

LED indicators

(

→ p.

))



Cyclic diagnostic and status information (

→

Input assembly

(

→ p.

))

Summary of Contents for AL1121














































































































Search results

Summary of Contents for AL1121

Reviews:

Related manuals for AL1121

Brands by name

Popular brands

IFM Electronic AL1121, Operating Instructions Manual

Search results

Summary of Contents for AL1121

Reviews:

Related manuals for AL1121

Brands by name

Popular brands