www.ies-synergy.com
User Manual
DUM016055-EN
4
1. Safety notes
Notice
Read these instructions carefully, and look at the equipment to become familiar with the device before trying
to install, operate, or maintain it. The following special messages may appear throughout this documentation
or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies
a procedure.
The addition of this symbol to a Danger hazard statements indicates that an electrical hazard
exists, wich result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personnal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
I
DANGER
DANGER
indicates an imminently hazardous situation which, if not avoided,
will result
in death or seri-
ous injury.
I
WARNING
WARNING
indicates a potentially hazardous situation which, if not avoided,
can result
in death or seri-
ous injury.
I
CAUTION
CAUTION
indicates a potentially hazardous situation which, if not avoided,
can result
in minor or mod-
erate injury.
NOTICE
NOTICE
is used to address practices not related to physical injury.
Please note
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No
responsibility is assumed by IES Synergy for any consequences arising out of the use of this material.
A qualified person is one who has skills and knowledge related to the construction and operation of electrical
equipment and its installation, and has received safety training to recognize and avoid the hazards involved.
