IEP Spidy ROLLER 230 V, Operating Instructions Manual

Page: 14 / 28

4 OPERATING INSTRUCTIONS Spidy Cable Reel
14
Note!
Observe the maximum mount-
ing height of the device of up
to a maximum of 6.30 m (with
the Spidy ROLLER 230 V, up to
a maximum of 8 m) (see also
Chapter 8.1 T
ECHNICAL DATA
).
4.3 Connecting the Cable Reel
Depending on the device type, you can
either connect the cable reel directly to
Industrieelektronik Pölz GmbH's battery
testing and charging system (or similar
devices) or to the mains supply.
Connect the pull out cable to Industrie-
elektronik Pölz GmbH's combined socket
on the vehicle or make another connec-
tion to the battery system.
Danger electrical hazard!
Check that the cable reel and
all its cables are in perfect
condition before use.
Caution!
Do not use a cable with a
green and yellow earth wire
with the Spidy ROLLER 12 V /
24 V and Spidy AIRROLLER
12 V / 24 V.
Note!
Industrieelektronik Pölz GmbH
recommends using a mainte-
nance unit (comprising an air
filter, a water separator, a
pressure reducer, a pressure
gauge and a bracket).
You can order maintenance
units from our customer service
(see also Chapter 1.2 C
USTOM-
ER SERVICE
).
4.3.1 Connecting a Spidy ROLLER
12 V / 24 V (without Com-
pressed Air Supply) to the
Battery Testing and Charging
System
1. Screw the cover off.