IEMCA SIR 52 F, Manual For Use And Maintenance, Page: 110 / 174

EN
7 - BAR FEEDER MAINTENANCE SIR-52-P/F
7 - Pag. 10 / 20
7.2.13 Clamps - Sharpening and adjustment
Sharpening
- Untighten screws (A).
- Remove and sharpen clamps according to the
sharp edges.
- Reassemble clamps.
- Tighten screws (A).
INFORMATION
If only a single clamp is sharpened,
check and centre the other clamps
whenever necessary.
Centring adjustment
Adjust the lower clamp position so that, once the
clamps are closed, the bar (D) axis is aligned with
the bar-pusher axis (E).
To adjust it:
- Loosen screw (A).
- Loosen nut (B).
- Tighten or untighten screw (C).
- Tighten nut (B).
- Tighten screw (A).
7.2.14 Lubricating oil - Level check
- The oil level must be between the
minimum level MIN. and maximum level
MAX.
- To top up oil, remove cover (A) and fill
with lubricating oil type:
class (C) CKB 100.