Print More Materials, All For Application
— 40 —
7.Common Problems and Their Solutions
Only a few common problems are listed, for more questions please contact the technician directly.
7.1 Movement
Problem
Solution
Problem 1: When extruding, the extrusion gear
shake.
Increase the print head temperature or determine
if the head is clogged or needs to be reloaded
with material.
Problem 2: One or two of the X, Y, Z and E axes
cannot be moved, and an alarm sound appears
when you click to move
Check if the limit switch is pressed
Problem 3: Opposite direction of motion
Open the firmware and change the control code
1 or -1
Problem 4: the machine movement "touch"
sound, power off and shut down, and again the
machine does not respond to power on
Refer
4.1.2
Printing with Auto-Calibration Section
8