Print More Materials, All For Application
- 39 -
7.3 Print
Problem
Solution
Problem 1: Prompt #1 or #2 no material, cannot print
properly
Add material at the filament-warning test
Problem 2: The print appears to be detached from the
bottom and is carried away
After determining that the platform is able to print
that material, adjust the platform and nozzle gap
when the zero point is small (see Printing - Installing
the Build Platform and Leveling for more information)
Problem 3: Dual head printing does not work well
together
Refer to the
maintenance - nozzle spacing
adjustment
