IEM Tel-O-Graph GSM, Operating Manual

Page: 81 / 304

Memory
29
EN
8 Memory
8.1 Saving readings
Fig. 10: Number of readings
The blood pressure monitor can save 350 blood
pressure readings and 350 pulse rate readings.
Note
Only readings that have not yet been transferred
to the database are saved.
If there are more than 350 readings, the oldest data will
be overwritten by the new readings.
7) ATTENTION
Data loss
▪
If there are 10 measurements on the display,
you will see a permanent error code, please
contact your healthcare provider.
▪
Pressing the button again will clear
the warning of the error code and you can
continue with your measurement.
▪
To avoid data loss, contact your healthcare
provider before or when the display shows 350
measurements.
The number of readings is shown on the display
(Fig. 10).
Note
Previously transmitted data is retained in the
database and is not overwritten.