manualshive.com logo in svg

IEI Technology WSB-H810, User Manual

Share
Download
IEI Technology WSB-H810 User Manual Download Page 81

 

 

WSB-H810 PICMG 1.0 CPU Card 

Page 67

Options Description 

+5V DUAL 

+5V dual (default) 

+5V +5V 

Table 4-4: USB Power Source Setup 

Please refer to Section 

5.4.1

 for detailed information. 

4.10 Chassis Installation 

4.10.1 Airflow 

 WARNING: 

Airflow is critical to the cooling of the CPU and other onboard 

components. The chassis in which the WSB-H810 must have air vents 

to allow cool air to move into the system and hot air to move out. 

The WSB-H810 must be installed in a chassis with ventilation holes on the sides allowing 

airflow to travel through the heat sink surface. In a system with an individual power supply 

unit, the cooling fan of a power supply can also help generate airflow through the board 

surface.  

4.10.2 CPU Card Installation 

To install the CPU card onto the backplane, carefully align the CPU card edge connector 

with the CPU card socket on the backplane. To do this, please refer to the reference 

material that came with the backplane. Next, secure the CPU card to the chassis. To do 

this, please refer to the reference material that came with the chassis. 

Summary of Contents for WSB-H810






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands