IEI Technology WSB-H610 User Manual Download Page 26

Page: 26 / 187

WSB-H610 PICMG 1.0 CPU Card

Page 11

2.1 Anti-static Precautions

WARNING!

Static electricity can destroy certain electronics. Make sure to follow the

ESD precautions to prevent damage to the product, and injury to the

user.

Make sure to adhere to the following guidelines:

Wear an anti-static wristband

: Wearing an anti-static wristband can prevent

electrostatic discharge.

Self-grounding

: Touch a grounded conductor every few minutes to discharge

any excess static buildup.

Use an anti-static pad

: When configuring any circuit board, place it on an

anti-static mat.

Only handle the edges of the PCB

: Don't touch the surface of the

motherboard. Hold the motherboard by the edges when handling.

2.2 Unpacking Precautions

When the WSB-H610 is unpacked, please do the following:

Follow the antistatic guidelines above.

Make sure the packing box is facing upwards when opening.

Make sure all the packing list items are present.

Summary of Contents for WSB-H610




























































































































































































Search results

Summary of Contents for WSB-H610

Reviews:

IEI Technology WSB-H610, User Manual, Page: 26 / 187

Search results

Summary of Contents for WSB-H610

Reviews: