manualshive.com logo in svg

IEI Technology WSB-H610, User Manual

Share
Download
IEI Technology WSB-H610 User Manual Download Page 158

 

 

WSB-H610 PICMG 1.0 CPU Card 

Page 143

Figure B-34: Recovery Tool Main Menu 

The recovery tool has several functions including: 

1.  Factory Restore: Restore the factory default image (iei.GHO) created in 

Section 

79

B.2.5. 

2. 

Backup system

: Create a system backup image (iei_user.GHO) which will be 

saved in the hidden partition. 

3. 

Restore your last backup

: Restore the last system backup image 

4. 

Manual

: Enter the Symantec Ghost window to configure manually. 

5. 

Quit

: Exit the recovery tool and restart the system. 

 WARNING: 

Please do not turn off the system power during the process of system 

recovery or backup.   

 

 WARNING: 

All data in the system will be deleted during the system recovery. 

Please backup the system files before restoring the system (either 

Factory Restore or Restore Backup). 

Summary of Contents for WSB-H610




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands