IEI Technology WSB-H610 User Manual Download Page 117

Page: 117 / 187

WSB-H610 PICMG 1.0 CPU Card

Page 102

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

Graphic

LAN

Audio

Intel®

AMT

Intel® Management Engine Components driver

Intel® IT Director application

Installation instructions are given below.

6.2 Software Installation

All the drivers for the WSB-H610 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears (

Figure 6-1

Summary of Contents for WSB-H610




























































































































































































Search results

Summary of Contents for WSB-H610

Reviews:

IEI Technology WSB-H610, User Manual, Page: 117 / 187

Search results

Summary of Contents for WSB-H610

Reviews: