IEI Technology WSB-9152 User Manual Download Page 134

Page: 134 / 258

WSB-9152 PICMG 1.0 SBC

Page 114

PIO Mode [Auto]

Use the

PIO Mode

option to select the IDE PIO (Programmable I/O) mode program timing

cycles between the IDE drive and the programmable IDE controller. As the PIO mode

increases, the cycle time decreases.

Auto D

EFAULT

BIOS auto detects the PIO mode. Use this value if the IDE disk

drive support cannot be determined.

PIO mode 0 selected with a maximum transfer rate of 3.3 MB/s

PIO mode 1 selected with a maximum transfer rate of 5.2 MB/s

PIO mode 2 selected with a maximum transfer rate of 8.3 MB/s

PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s

PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s

(This setting generally works with all hard disk drives

manufactured after 1999. For other disk drives, such as IDE

CD-ROM drives, check the specifications of the drive.)

DMA Mode [Auto]

Use the

DMA Mode

BIOS selection to adjust the DMA mode options.

Auto D

EFAULT

BIOS auto detects the DMA mode. Use this value if the IDE

disk drive support cannot be determined.

SWDMA0

Single Word DMA mode 0 selected with a maximum data

transfer rate of 2.1 MB/s

SWDMA1

Single Word DMA mode 1 selected with a maximum data

transfer rate of 4.2 MB/s

SWDMA2

Single Word DMA mode 2 selected with a maximum data

transfer rate of 8.3 MB/s

MWDMA0

Multi Word DMA mode 0 selected with a maximum data

transfer rate of 4.2 MB/s

Summary of Contents for WSB-9152



































































































































































































































































Search results

Summary of Contents for WSB-9152

Reviews:

IEI Technology WSB-9152, User Manual, Page: 134 / 258

Search results

Summary of Contents for WSB-9152

Reviews: