manualshive.com logo in svg

IEI Technology WAFER-UTL3, User Manual

Share
Download
IEI Technology WAFER-UTL3 User Manual Download Page 73

 

 

WAFER-ULT3/ULT4 3.5" SBC

Page 60 

4.7 Chassis Installation 

4.7.1 Heat Sink Enclosure   

 WARNING: 

Never run the WAFER-ULT3/ULT4 without the heat sink secured to the 

board. The heat sink ensures the system remains cool and does not 

need addition heat sinks to cool the system. 

 

 WARNING: 

When running the WAFER-ULT3/ULT4, do not put the 

WAFER-ULT3/ULT4 directly on a surface that can not dissipate system 

heat, especially the wooden or plastic surface. It is highly 

recommended to run the WAFER-ULT3/ULT4 

Æ

 on a heat dissipation surface or 

Æ

 using copper pillars to hold the board up from the chassis 

When the WAFER-ULT3/ULT4 is shipped it is secured to a heat sink with five retention 

screws. If the WAFER-ULT3/ULT4 must be removed from the heat sink, the five retention 

screws must be removed. 

 

Figure 4-15:

 

Heat Sink Retention Screws 

Summary of Contents for WAFER-UTL3







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands