IEI Technology WAFER-US15WP, User Manual

Page: 74 / 94

WAFER-US15WP 3.5" SBC
Page 64
ƒ
AddOn ROM Display Mode [Force BIOS]
Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory)
messages to be displayed.
Î
Force BIOS D
EFAULT
The system forces third party BIOS to display
during system boot.
Î
Keep Current
The system displays normal information during
system boot.
ƒ
Bootup Num-Lock [On]
Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be
modified during boot up.
Î
Off
Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.
Î
On D
EFAULT
Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
ƒ
Boot From LAN Support [Disabled]
Use the Boot From LAN Support option to enable the Ethernet controller to boot the
system.
ƒ
Enabled
ƒ
Disabled D
EFAULT