IEI Technology WAFER-ULT-i1, User Manual, Page: 69 / 164

WAFER-ULT/ULT2-i1 3.5" SBC
Page 54
Step 4: Secure the iRIS-1010 module . Secure the iRIS-1010 module with the retention
screw previously removed ( Figure 4-4 ).
Figure 4-4: Securing the iRIS-1010 Module
NOTE:
After installing the iRIS-1010 module, use LAN2 port to establish a
network connection. Please refer to Section 4.11 for IPMI setup
procedures.
4.5 Full-size PCIe Mini Card Installation
The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card.
To install a full-size PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot . See Figure 3-17 .
Step 2: Remove the retention screw . Remove the retention screw as shown in
Figure 4-5 .