IEI Technology WAFER-PV-D5252, User Manual

Page: 74 / 142

WAFER-PV-D5252/D4252/N4552 SBC
Page 61
Figure 4-19: VGA Connector
Step 4: Secure the connector . Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.9 Software Installation
All the drivers for the WAFER-PV-D5252/D4252/N4552 are on the CD that came with the
system. To install the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-20).