manualshive.com logo in svg

IEI Technology WAFER-LX Series, User Manual, Page: 96 / 198

Share
Download
IEI Technology WAFER-LX Series User Manual Download Page 96

 

 

Page 96 

 

IEI® Technology, Corp

.

 

WAFER-LX

 

Base Memory:   

The 

Base Memory

 is NOT user configurable. The POST determines the amount of base 

(or conventional) memory installed in the system. The value of the base memory is 

typically 512K for systems with 512K memory installed, or 640K for systems with 640K or 

more memory installed.   

 

Extended Memory 

The 

Extended Memory

 is NOT user configurable. The BIOS determines how much 

extended memory is present during the POST. This is the amount of memory above 1MB 

located in the memory address map of the CPU. 

 

Total Memory 

The 

Total Memory

 is NOT user configurable.   

5.2.1 IDE Primary Master/Slave 

Use the IDE Primary Master/Slave menu to set or change the master/slave IDE 

configurations. 

 

IDE HDD Auto-Detection [Press Enter] 

Use the 

IDE HDD Auto-Detection

 option to enable BIOS to automatically detect the IDE 

settings. Select 

IDE HDD Auto-Detection

 and press 

E

NTER

.

 BIOS automatically detects 

the HDD type. Do not set this option manually. 

 

IDE Primary Master [Auto] 

Use the 

IDE Primary Master

 option to activate or deactivate the following drive channels: 

 

Channel 0 Master 

 

Channel 0 Slave 

 

Channel 1 Master 

 

Channel 0 Slave 

 

 

None 

 

If no drives are connected to the IDE channel select this 

Summary of Contents for WAFER-LX Series







































































































































































































Reviews:

No comments