IEI Technology WAFER-LX-800-R12, User Manual

Page: 98 / 227

WAFER-LX Motherboard
Page 80
ƒ
PC Health Status : Monitors essential system parameters.
The following user configurable options are also available in BIOS Menu 1 :
Î
Load Fail-Safe Defaults
Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS
parameter in the setup menus. Press F6 for this operation on any page.
Î
Load Optimized Defaults
Use the Load Optimized Defaults option to load optimal default values for each BIOS
parameter in the setup menus. Press F7 for this operation on any page.
Î
Set Supervisor Password
Use the Set Supervisor Password option to set the supervisor password. By default, no
supervisor password is set. To install a supervisor password, select this field and enter the
password. After this option is selected, a red dialogue box appears with “ Enter
Password: ”. Type the password and press E
NTER
. Retype the original password into the
“ Confirm Password: ” dialogue box and press E
NTER
. To disable the password, simply
press E
NTER
in the “ Enter Password: ” dialogue box, then press any key in the
“ Password Disabled !!! ” dialogue box.
Î
Set User Password
Use the Set User Password option to set the user password. By default no user
password is set. To install a user password, select this field and enter the password. After
this option is selected, a red dialogue box appears with “ Enter Password: ”. Type the
password and press E
NTER
. Retype the original password into the “ Confirm Password: ”
dialogue box and press E
NTER
. To disable the password, simply press E
NTER
in the “ Enter
Password: ” dialogue box, then press any key in the “ Password Disabled !!! ” dialogue
box.
Î
Save & Exit Setup
Use the Save & Exit Setup option to save any configuration changes made and exit the
BIOS menus.