IEI Technology WAFER-AL, User Manual

Page: 107 / 139

WAFER-AL SBC
Page 93
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
IGD Configuration
Primary Display [IGD]
Integrated Graphics Device [Enable]
DVMT Pre-Allocated [256M]
DVMT Total Gfx Mem [MAX]
Primary IGFX Boot Display [Auto]
Select which of IGD/PCI
Graphics device should
be Primary Display.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 18: Intel IGD Configuration

Primary Display [IGD]
Use the Primary Display option to select the graphics controller used as the primary boot
device. Select either an integrated graphics controller (IGD) or a PCI express (PEG)
controller. Configuration options are listed below:

IGD D
EFAULT

PCIe

Integrated Graphics Device [Enable]
Use the Integrated Graphics Device option enables or disables Integrated Graphics
Device (IGD).

Disable
Always disable IGD.

Enable D
EFAULT
Enabled Integrated Graphics Device (IGD) when
selected as the Primary Video Adaptor.

DVMT Pre-Allocated [256MB]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can