IEI Technology WAFER-945GSELVDS2-N270-R10, User Manual

Page: 116 / 140

WAFER-945GSELVDS2
Page 104
ƒ
Change Supervisor Password
Use the Change Supervisor Password to set or change a supervisor password. The
default for this option is Not Installed . If a supervisor password must be installed, select
this field and enter the password. After the password has been added, Install appears
next to Change Supervisor Password .
ƒ
Change User Password
Use the Change User Password to set or change a user password. The default for this
option is Not Installed . If a user password must be installed, select this field and enter the
password. After the password has been added, Install appears next to Change User
Password .
5.7 Chipset
Use the Chipset menu to access the Northbridge and Southbridge configuration menus
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Advanced Chipset Settings
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
WARNING: Setting wrong values in below section
may cause system to malfunction.
> Northbridge Configuration
> Southbridge Configuration
ÅÆ
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 22: Chipset