manualshive.com logo in svg

IEI Technology Wafer-8522, User Manual

Share
Download
IEI Technology Wafer-8522 User Manual Download Page 139

 

WAFER-8522 Motherboard 

 

ATX  

An ATX power supply is connected to the system 

 

Resume on Ring [Disabled] 

The 

Resume on Ring

 BIOS option specifies if the system will be roused from a 

suspended or standby state when there is activity on the RI (ring in) modem line. That is, 

the system will be roused by an incoming call on a modem.   

 

Disabled D

EFAULT

 

Wake event not generated by an incoming call 

 

Enabled 

 

Wake event generated by an incoming call 

 

Resume on PME# [Enabled] 

The 

Resume on PME#

 BIOS option specifies if the system will be roused from a 

suspended or standby state when there is activity on the PCI PME (power management 

event) controller. 

 

Disabled 

 

Wake event not generated by PCI PME controller 

activity 

 

Enabled D

EFAULT

 

Wake event generated by PCI PME controller activity 

 

Power Button Mode [On/Off] 

The 

Power Button Mode

 BIOS specifies how the power button functions. 

 

On/Off D

EFAULT

 

When the power button is pressed the system is either 

turned on or off 

 

Suspend 

 

When the power button is pressed the system goes into 

suspend mode 

 

 

Page 125

StockCheck.com

Summary of Contents for Wafer-8522



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands