IEI Technology Wafer-8522, User Manual

Page: 134 / 178

WAFER-8522 Motherboard
The Init. Graphic Adapter Priority option selects the graphics controller the system uses
as a primary boot device. The options are:
Internal VGA
PCI/Int-VGA D
EFAULT
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Disable
Enable, 1MB 1MB of memory used by internal graphics device
Enable, 4MB 4MB of memory used by internal graphics device
Enable, 8MB D
EFAULT
8MB of memory used by internal graphics device
Enable, 16MB
16MB of memory used by internal graphics device
Enable, 32MB 32MB of memory used by internal graphics device
Graphics Aperture Size [64MB]
The Graphics Aperture Size option selects the size of the AGP aperture. The aperture is
a portion of the PCI memory address range dedicated as graphics memory address
space.
64MB D
EFAULT
Graphics aperture size set as 64MB
128MB Graphics aperture size set as 128MB
256MB Graphics aperture size set as 256MB
Boot Display Device [Auto]
The Boot Display Device BIOS option selects the display device the system uses when it
boots. The available options are listed below:
Page 120
StockCheck.com