IEI Technology Wafer-8522, User Manual

Page: 127 / 178

WAFER-8522 Motherboard
Boot Display Device [Auto]
The Boot Display Device BIOS option selects the display device the system uses when it
boots. The available options are listed below:
Auto D
EFAULT
CRT
LFP
CRT + LFP
Spread Spectrum Mode [Disabled]
Use the Spread Spectrum Mode option to reduce the EMI. Excess EMI is generated
when the system clock generator pulses have extreme values. Spreading the pulse
spectrum modulates changes in the extreme values from spikes to flat curves, thus
reducing the EMI. This benefit may in some cases be outweighed by problems with
timing-critical devices, such as a clock-sensitive SCSI device.
Disabled D
EFAULT
EMI not reduced
Enabled EMI reduced
6.4.2 Boot Device Priority
Use the Boot Device Priority menu ( BIOS Menu 14 ) to specify the boot sequence from
the available devices. Possible boot devices may include:
HDD
Page 113
StockCheck.com