IEI Technology Wafer-8522, User Manual

Page: 111 / 178

WAFER-8522 Motherboard
4 PIO mode 4 selected with a maximum transfer rate of 16.6MBps
(This setting generally works with all hard disk drives
manufactured after 1999. For other disk drives, such as IDE
CD-ROM drives, check the specifications of the drive.)
DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Auto D
EFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
S.M.A.R.T [Auto]
Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts
impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Auto D
EFAULT
BIOS auto detects HDD SMART support.
Disabled Prevents BIOS from using the HDD SMART feature.
Enabled Allows BIOS to use the HDD SMART feature
32Bit Data Transfer [Disabled]
Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.
Disabled D
EFAULT
Prevents the BIOS from using 32-bit data transfers.
Enabled
Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
6.3.3 Super IO Configuration
Page 97
StockCheck.com