IEI Technology UPC-V315-QM77, User Manual, Page: 78 / 145

UP C-V315-QM77 P a n e l P C
P a g e 66

None D
EFAULT
No parity bit is sent with the data bits.

Even The parity bit is 0 if the number of ones in the data
bits is even.

Odd The parity bit is 0 if the number of ones in the data
bits is odd.

Mark The parity bit is always 1. This option does not
provide error detection.

Space The parity bit is always 0. This option does not
provide error detection.

S to p Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1 D
EFAULT
Sets the number of stop bits at 1.

2
Sets the number of stop bits at 2.
4.3.10 iEi Fe a tu re
Use the iEi Feature menu ( BIOS Menu 13) to configure One Key Recovery function.