IEI Technology tKINO-ULT3, User Manual

Page: 116 / 151

tKINO-ULT3 SBC
Page 102

VT-d [Disabled]
Use the VT-d option to enable or disable VT-d support.

Disabled D
EFAULT
Disable VT-d support.

Enabled
Enable VT-d support.
5.4.1.1 Graphics Configuration
Use the Graphics Configuration menu (
6
BIOS Menu 19 ) to configure the graphics
settings.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display [Auto]
Internal Graphics [Enabled]
DVMT Pre-Allocated [256M]
DVMT Total Gfx Mem [MAX]
HDMI_DP Switch Status [HDMI]
LVDS_eDP Switch Status [LVDS]
> LCD Control
Select which of
Auto/IGFX/PCIE Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
---------------------

: Select Screen
 
: Select Item
Enter Select
+ - Change Opt.
F1 General
Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 19: Graphics Configuration

Primary Display [Auto]
Use the Primary Display option to select the graphics controller used as the primary boot
device. Configuration options are listed below:

Auto D
EFAULT

IGFX

PCIE