IEI Technology tKINO-AL User Manual Download Page 103

Page: 103 / 136

tKINO-AL SBC

Page 89



OS Selection [Windows]

Use the

OS Selection

BIOS option to select an operating system (OS) before installing

OS.



Windows D

EFAULT

The system will be installed with Windows operating

system.



Android

The system will be installed with Android operating

system.



WIN 7

The system will be installed with Windows 7

operating system.



Intel Linux

The system will be installed with Linux operating

system.

WARNING:

Before installing the operating system, the user must enter the

Boot

BIOS menu and choose which operating system will be installed.

Otherwise, the OS installation may fail.



USB Connector Power Select [S4/S5 On]

Use the

USB Connector Power Select

BIOS option to turn on or turn off the 5V USB

power during S4/S5.



S4/S5 Off

Turn off the 5V USB power during S4/S5



S4/S5 On

EFAULT

Turn on the 5V USB power during S4/S5

Summary of Contents for tKINO-AL









































































































































Search results

Summary of Contents for tKINO-AL

Reviews:

Brands by name

Popular brands

IEI Technology tKINO-AL, User Manual

Search results

Summary of Contents for tKINO-AL

Reviews:

Brands by name

Popular brands