IEI Technology tKINO-AL, User Manual

Page: 100 / 136

tKINO-AL SBC
Page 86
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Chipset
Intel IGD Configuration
Primary Display [IGD]
DVMT Pre-Allocated [256M]
DVMT Total Gfx Mem [MAX]
IGD Flat Panel [Auto]
Backlight Control [PWM-Inverted]
DP1 Output Type Select [Auto Detect]
DP1 Current Type [HDMI]
DP2 Output Type Select [Auto Detect]
DP2 Current Type [DP++]
Select which of IGD/PCI
Graphics device should
be Primary Display.
---------------------

: Select Screen
 
: Select Item
Enter Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 17: Intel IGD Configuration

Primary Display [IGD]
Use the Primary Display option to select the graphics controller used as the primary boot
device. Select either an integrated graphics controller (IGD) or a PCI express (PEG)
controller. Configuration options are listed below:

IGD D
EFAULT

PCIe

DVMT Pre-Allocated [256MB]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can
then only be used as graphics memory, and is no longer available to applications or the
operating system. Configuration options are listed below:

64M

128M

256M D
EFAULT

512M