IEI Technology TANK-XM811, User Manual

Page: 33 / 71

TANK-XM811
Page 23
3.6 Wi-Fi Module Installation (Optional)
The Wi-Fi module is an optional accessory. You can purchase it from IEI or other
providers. Note that you have to purchase Wi-Fi module, internal antenna and external
antenna. It is suggested to purchase an internal antenna longer than 200mm.
To install the Wi-Fi module, follow the steps below.
Step 1:
Remove the M.2 A key retention screw.
Step 2:
Insert the Wi-Fi module (IEI P/N: EMB-WIFI-KIT02I3-R10, including one
Intel AX210 wireless Bluetooth function module, two 300mm internal
antennas and two 108mm external antennas) and secure the screw.
Step 3:
Secure one end of the internal antenna to the Wi-Fi module.
Step 4:
Knock out the reserved antenna holes on the chassis, and secure the other
end of the internal antenna on the chassis.
Step 5:
Install the external antennas( Figure 3-9 )