IEI Technology TANK-860-HM86 Series, User Manual

Page: 55 / 134

TANK-860-HM86 Em b e d d e d S ys te m
P a g e 43
3.6.8 P o we r In p u t, 3-p in Te rm in a l Blo c k
The power connector connects the leads of a 9 V~36 V DC power supply into the terminal
block. Make sure that the power and ground wires are attached to the correct sockets of
the connector.
Figure 3-16: 3-pin Terminal Block
3.6.9 P o we r In p u t, 4-p in DIN Co n n e c to r
The power connector connects to the 9 V~36 V DC power adapter.
Figure 3-17: Power Input Connector
3.6.10 RJ -45 RS -232 S e ria l P o rts
RS-232 serial port devices can be attached to the RJ-45 RS-232 serial ports on the rear
panel.
S te p 1: Locate the RJ-45 RS-232 connectors . The locations of the RJ-45 RS-232
connectors are shown in Figure 1-2 .
S te p 2:
Insert the RJ-45 connector. Insert the RJ-45 connector on the RJ-45 to DB-9
COM port cable to one of the RJ-45 RS-232 connectors on the TANK-860-HM86
Series. See Figure 3-18 .