IEI Technology TANGO-7010 Series, User Manual, Page: 54 / 125

Page 43
TANGO-7010 Embedded System
4.2.10 Flash Override Jumper (ME_FLASH1)
CN Label:
ME_FLASH1
CN Type:
2-pin header, P=2.00mm
CN Location:
See Figure 4-11
CN Pinouts:
See Table 4-11
The ME_FLASH1 connector is used for Flash Descriptor Security Override.
Figure 4-11: Flash Descriptor Override Setting Jumper Locations
PIN NO. DESCRIPTION
NC (default)* Disabled-Default
Short 1-2 Override
Table 4-11: Flash Descriptor Security Override Jumper Pinouts