manualshive.com logo in svg

IEI Technology SPCIE-C236, User Manual, Page: 72 / 159

Share
Download
IEI Technology SPCIE-C236 User Manual Download Page 72

 

 

SPCIE-C236 Full-size PICMG 1.3 CPU Card 

Page 57

4.6 iRIS-2400 Module Installation (Optional) 

 WARNING: 

The iRIS-2400 module slot is designed to install the IEI iRIS-2400 IPMI 

2.0 module only. DO NOT install other modules into the iRIS module 

slot. Doing so may cause damage to the SPCIE-C236. 

To install the iRIS-2400 module, please follow the steps below and refer to 

Figure 4-7

. 

 

Figure 4-7: iRIS-2400 Module Installation 

Step 1: 

Locate the IPMI module slot

. Place the SPCIE-C236 on an anti-static pad. 

Step 2: 

Align the iRIS-2400 module with the iRIS module slot

. Align the notch on the 

module with the notch on the iRIS module slot. 

Step 3: 

Insert the iRIS-2400 module

. Push the module in at a 20º angle (

Figure 4-7

). 

Step 4: 

Seat the iRIS-2400 module

. Gently push downwards and the arms clip into 

place (

Figure 4-7

).

 

Step 0:

 

Summary of Contents for SPCIE-C236
































































































































































Reviews:

No comments