IEI Technology SPCIE-C236, User Manual

Page: 121 / 159

SPCIE-C236 Full-size PICMG 1.3 CPU Card
Page 106
5.4.1.2 PEG Port Configuration
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Chipset
PEG Port Configuration
PEG Link Width Configuration [1x16]
PEG 0:1:0 Not Present
Enable Root Port [Enabled]
Max Link Speed [Auto]
Detect Non-Compliance Device [Disabled]
Select PEG Port Link
Width as x16 or 2x8
configuration.
----------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 22: PEG Port Configuration
Î
PEG Link Width Configuration [1x16]
Use the PEG Link Width Configuration option to configure the PCIe x16 channel mode
on the backplane.
Î
1x16 D
EFAULT
Sets the PCIe x16 link width as one PCIe x16 slot
Î
2x8 Sets the PCIe x16 link width as two PCIe x8 slots
Î
1x8, 2x4 Sets the PCIe x16 link width as one PCIe x8 and two
PCIe x4 slots
Î
Enable Root Port [Enabled]
Use the Enable Root Port option to enable or disable the PCI Express (PEG) controller.
Î
Disabled
Disables the PCI Express (PEG) controller.
Î
Enabled D
EFAULT
Enables the PCI Express (PEG) controller.