IEI Technology SPCIE-C236, User Manual

Page: 102 / 159

SPCIE-C236 Full-size PICMG 1.3 CPU Card
Page 87
Î
IO=2F8h;
IRQ=3, 4, 11
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4, 11
Î
IO=3E8h;
IRQ=3, 4, 11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ3, 4, 11
Î
IO=2E8h;
IRQ=3, 4, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ3, 4, 11
Î
IO=2D0h;
IRQ=3, 4, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ3, 4, 11
Î
IO=2E0h;
IRQ=3, 4, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ3, 4, 11
Î
Transfer Mode [RS232]
The serial port allows setting the data transfer mode to RS-232, RS-422 or RS-485.
5.3.4.2 Parallel Port Configuration
Use the Parallel Port Configuration menu ( BIOS Menu 8 ) to configure the parallel port.
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5
Change Settings
[Auto]
Device Mode [STD Printer Mode]
Enable or Disable
Parallel Port (LPT/LPTE)
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 8: Parallel Port Configuration Menu