manualshive.com logo in svg

IEI Technology ROCKY-4786EV, User Manual

Share
Download
IEI Technology ROCKY-4786EV User Manual Download Page 58

 

 

ROCKY-4786EV/EVG User Manual

Page 48 

 

4.3 ROCKY-4786EV/EVG CPU Card Installation 

 

WARNING!

   

 

1.  Never run the CPU board without an appropriate heat sink and cooler that 

can be ordered from IEI Technology or purchased separately. 

2.

  Be sure to use the CPU 12V power connector (CN10007) for the CPU 

power.

 

 

 WARNING! 

Please note that the installation instructions described in this manual should 

be carefully followed in order to avoid damage to the CPU Card components 

and injury to you.

 

 

 WARNING! 

When installing electronic components onto the CPU Card always take the 

following anti-static precautions in order to prevent ESD damage to your 

board and other electronic components like the CPU and DIMM modules

 

The following components must be installed onto the CPU Card or connected to the CPU 

Card during the installation process. 

 CPU 

 

CPU cooling kit 

 DIMM 

modules 

 

Peripheral device connection 

 

 

 

 

 

 

StockCheck.com

Summary of Contents for ROCKY-4786EV


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands