IEI Technology ROCKY-3786EV, User Manual, Page: 69 / 147

Page 69
MODEL NAME
ROCKY-3786EV CPU Card
Page 69
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2 Unpacking
NOTE:
If any of the items listed below are missing when the
ROCKY-3786EV is unpacked, do not proceed with the
installation. Contact the ROCKY-3786EV reseller or
vendor.
4.2.1 Unpacking Precautions
Some components on ROCKY-3786EV are very sensitive to static electricity and can be
damaged by a sudden rush of power. To protect the ROCKY-3786EV from being
damaged, by ESD follow these precautions:
Any person handling the ROCKY-3786EV should be grounded. This removes
static charge before the ROCKY-3786EV is touched. To remove static
electricity, wear a grounded wrist strap at all times or frequently touch any
conductive materials that are connected to the ground.
Handle the ROCKY-3786EV by its edges. Do not touch the IC chips, leads or
circuitry unnecessarily.
Do not place the PCB on top of the anti-static bag. Only the inside of the bag
is safe from static discharge.
4.2.2 Checklist
When unpacking the ROCKY-3786EV, please make sure that the package contains the
following items.
1 x ROCKY-3786EV single board computer