IEI Technology PUZZLE-IN003B, User Manual, Page: 36 / 86

PUZZLE-IN003B
Page 26
3.8 Power-On Procedure
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power-on the PUZZLE-IN003B please follow the steps below:
Step 1: Connect the power adapter shipped with the PUZZLE-IN003B to the power jack
on the rear panel.
Step 2: Use a power cord to connect the power adapter and the power source.
Step 3: Turn on the power switch to power up the system.
Step 4: The power LED indicator on the front panel turns to green. Step 0:
Figure 3-11: Power-on