IEI Technology PUZZLE-A002, User Manual, Page: 24 / 87

PUZZLE-A002
Page 14
To install the DIMM module, please follow the steps below.
Step 1: Remove the top cover from the PUZZLE-A002. Please follow the instruction
described in Section 3.2 .
Step 2: Locate the DIMM slots on the motherboard.
Figure 3-2: DIMM Slot Locations
Step 3: Open the DIMM socket handles. Open the two handles outwards as far as they
can.
Step 4: Align the DIMM so the notch on the memory lines up with the notch on the
memory socket.
Step 5: Once aligned, press down until the DIMM is properly seated. Clip the two
handles into place.
Step 6: To remove a DIMM, push both handles outward. The memory module is ejected
by a mechanism in the socket. Step 0: