IEI Technology PUZZLE-A001, User Manual

Page: 23 / 90

PUZZLE-A001
Page 13
3.1 Installation Precautions
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the PUZZLE-A001, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the PUZZLE-A001 must be
disconnected during the installation process. Failing to disconnect the power
may cause severe injury to the body and/or damage to the system.

Qualified Personnel : The PUZZLE-A001 must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.

Air Circulation : Make sure there is sufficient air circulation when installing
the PUZZLE-A001. The PUZZLE-A001’s cooling vents must not be
obstructed by any objects. Blocking the vents can cause overheating of the
PUZZLE-A001. Leave at least 5 cm of clearance around the PUZZLE-A001 to
prevent overheating.

Grounding : The PUZZLE-A001 should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the PUZZLE-A001.
3.2 Top Cover Removal
Before installing or maintaining the internal components, the top cover must be removed
from the PUZZLE-A001. Follow the steps below to complete the task.
Step 1:
Remove the five retention screws indicated in
Figure 3-1
.
Step 2: Slide the top cover towards the rear side and gently lift the top cover
( Figure 3-1 ).